More Products
The Silicom Denmark fb2CGg3 Dual capture card offers 2x100GE network connectivity and line rate capture to host memory with zero packet loss and hardware packet processing.
The fbC2CGg3 dual capture card is based on cutting edge Xilinx FPGA technology, providing packet filtering, advanced processing, traffic management, load balancing and host offloading mechanisms.
This high performance hardware platform connects to 100GE using QSFP28 modules and performs packet processing, while delivering a sustained throughput to host memory of up to 224 Gbps. The use of QSFP28 cages also allows use of QSFP to support 8x10GE, 2x40GE as wells as 8x25GE
The card uses a single-slot PCIe solution through a 16-lane PCIe slot. It also features a second PCIe connector for cable connection to a second PCIe slot. The second PCIe connector can also serve as a card-to-card interconnect path to a second card. Both use cases enable effective traffic management and load balancing in NUMA environments.
This Dual Capture card is also available as a cost optimized variant for 10GE and 40GE.
fbC2CGg3 – Dual Port Capture Card:
NETWORK INTERFACE IEEE standard: IEEE 802.3 10GE, 40GE, 25GE, 100GE Physical interface: 2 x QSFP28 port 10GE and 25GE supported through break-out cable assemblies Supported QSFP28 modules (25GE/100GE)
Supported QSFP+ modules (10GE/40GE)
Ethernet PHY directly embedded in FPGA
HOST INTERFACE Physical bus connector: 16 lane PCIe PCIe bus type: 16 lanes PCIe Gen3 PCIe compliant 64 logical channels that can be connected to DMA or egressed to physical output ports
ON-BOARD MEMORY On board buffering for application robustness 16 GB 64 bit DDR4
PERFORMANCE Capture rate (bursts): Line rate Capture rate (sustained): Line rate, PCIe BW limited
LATENCY Less than 3.2 μs to host memory Less than 3.2 μs from host memory to Tx Non-blocking sending, allowing user applications to operate independently
TIME STAMPING & SYNC Resolution = 3.2 ns Accuracy down to 20 ns Daisy chain PPS between multiple cards supported
PPS synchronization via SMA connector Optional PTP IEEE 1588-2008 RJ45 via secondary supporting card
CONFIGURATION Dual boot images with automatic fallback to fail-safe image Full firmware upgrades via supplied tools or fbCAPTURE API
ENVIRONMENT Physical dimensions: ¾ length, standard height PCIe: 111 x 254 mm Weight: 320g Operating temperature: 0 – 55°C, 30 – 130°F Operating humidity: 20 – 80% Hardware compliance: RoHS, CE Passive cooling, with adequate host cooling, available Active cooling solution
ADDITIONAL CARD SUPPORT fbCAPTURE API On-board temperature sensor On-board multi-color status LED Link and Activity LED for ports
CARD VARIANTS All card variants have FPGAs optimized for resource requirements of the varying link types. Available models: Variants supporting multiple speeds can be freely used with these speeds.
Mixed speed models can can be customized
Datasheet:
100GE Capture Cards: Silicom PB_fbC2CGg3 Datasheet